10500 Seymour Ave Franklin Park, IL 60131 | Phone: +1.847.671.4300 / +1.800.982.5839 | Fax: +1.800.447.8329 |
Copyright © 2020 Sloan. All rights reserved.
Page: 6 of 11
Installation Instructions
Code #: 0816885 Draft: 7.0 (10/20)
Connect the AC Power In
Figure 4
AC Power In
WARNING - Risk of Electric Shock. Connect Only to a Supply Protected by a Ground-Fault Circuit-Interrupter (GFCI).
1. Plug a 12/3-Prong NEMA L5-20 AMP 125V Power cord (Not supplied) into twist lock AC Power In receptacle
on the rear panel of the Mobile Handwashing Sink, and connect the opposite end to a matching NEMA L5-
20R twist-lock receptacle (120V/20A).
Note:
Strain Relief - UL 1951, Clause 10.4 and C22.2 No. 68, Clause 5.6 - A flexible cord shall be provided with a means
to reduce the transmittal of tensional or rotational force from the cord to the wiring connections. A detachable
flexible power supply cord will be permitted for the 120 VAC powered Hand Washing Stations if the appliance
inlet is a twist-lock design.