SM-07MHD
7
8
Diagram 2. SM-07MHD system connection.
Notes:
* Use
«Power» plug on the monitor to connect external power 14 V. While use external power
supply please keep main power cord ~100-240 V disconnected from the outlet, otherwise it can
damage monitor circuits;
** Door panels, cameras, power supplys, locks and motion sensors described on the schemes are
optional devices and aren’t included into monitors kit;
*** Up to 3 monitors can be connected into one system.
4.3. Unit mount
1) Take the surface mount bracket from the kit and place it 150-160 cm from the floor line;
2) Mark and drill four halls in the wall;
3) Take four nuts from the kit and hammer them into the drilled halls;
4) Fix surface mount bracket on the wall by four screws from the kit;
5) Connect all communication wires and fix the monitor on the surface mount bracket.
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
SM-07MHD (Master)
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
SM-07MHD (Slave)
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Da
ta
Video
SM-07MHD (Slave)
