SM-07MHD
23
24
9. External sensors motion detection recording
Camera 1 and Camera 2 has motion detection function from external motion sensor. When external
sensor connects or disconnects its contacts (depending on
«CAM1 sensor type»
or
«CAM2 sensor type»
setting in
«Main menu»
→
«Alarm»
, page 17-18),
recording starts
on the
indoor monitor. Video recording
time is 10 seconds. Press button to stop recording manually.
Use any external sensors that have normaly opened «NO» or normaly closed «NC» contacts. When the
sensor is activated it connects (NO case) or disconnects (NC case) contacts which activates recording on
the indoor monitor.
+12 V
Ground
Ground
Video
Camera
power
supply
Motion sensor
CCTV camera
Not used
Signal
Ground
Video
External motion sensor connection.
8. Manual and automatic recording
Every time visitor press call buton on the outdoor panel, recording process stars automatically. Depending
on the
«Record mode»
setting (page 17) snapshots or video can be recorded.
User can also take snapshots or record video manually during outdoor panel or CCTV camera
monitoring . Move the joystick up in monitoring or conversation mode to take a snapshot or move
the joystick down to start/stop video recording.
Note:
Video can be recorded only if SD card installed into monitor slot. If SD card slot is empty then monitor
records snapshots using internal memory, doesn’t metter what «Record mode» is set.
100 snapshots can be stored using internal memory. If the quantity exceeds 100 snapshots then older
snapshot are replaced by the new one.
6.9. Image viewing (photo frame)
Create «FRAME» folder in the root of microSD card, if it isn’t already created by the monitor. Paste JPG files
you would like to view into this folder. File name should have only english letters and figures in its name
and its quantity should not exceeds 8 symbols to be visible on the monitor .
Insert microSD card into the monitor and go to the «Files» menu. Then press button three times to go
to the «Frame» folder and choose the file to start viewing.
Note that JPG images resolution must not exceed 2560×1440 pixels. Other image formats and resolutions
are not supprted.
7. Display and volume settings
While outdoor panel or CCTV camera image monitoring press joystick to enable brightness control
menu. Move the joystick up or down to increase or decrease image brightness.
Press joystick again to go to the contrast setting and one more time to get to the color setting.
While talking with the visitor press joystick to enable talking volume control. Move the joystick
up or down to increase or decrease talking volume.
While incoming call press joystick to enable ringing volume control. Move the joystick up or
down to increase or decrease ringing volume.
2021/01/28 12:24:42
25
record indicator
current video source indictor
microSD card presence indicator
mute mode indicator
Image parameter
setting
