Slinex SM-07MHD, Руководство пользователя

Страница: 10 / 14

Ring settings
Interval 1:
06 : 00 ~ 12 : 00 08 30
sec
Interval 2:
12 : 00 ~ 18 : 00 04 30
sec
Interval 3:
18 : 00 ~ 06 : 00 01 30
sec
Time Volume Ring time
Confirm Cancel
( ) ( )
Ring volume
Main menu
Ring
Main menu
Mode
Door 1 unlock time − Door 1 relay delay time, 1,3, 5, 7 or 9 seconds;
Door 2 unlock time − Door 2 relay delay time, 1,3, 5, 7 or 9 seconds;
Key backlight − «On» or «Off»;
Keyboard sound − «On» or «Off»;
Door panel backlight − «On» or «Off».
Mode
Mode Master
Door 2 status Off
Record mode Snapshot
Door 1 unlock time 02 sec.
Door 2 unlock time 03 sec.
Key backlight On
Keyboard sound Off
Door panel backlight On
( )
Alarm setting
CAM1 sensor type NO
CAM2 sensor type Off
CAM1 status On
CAM2 status Off
CAM1 alarm time 10 sec.
CAM2 alarm time 10 sec.
Alarm type Video
Main menu
Alarm
SM-07MHD
17 18
6.4. Working mode settings
Press «Mode» icon in the main menu to enter working mode settings.
Following parameters are available in the «Mode» menu:
Mode − choose «Master» if you use one monitor in the system or if it’s the monitor which all the
door panels and CCTV cameras are connected to. Choose «Slave» if there is more than one monitor
in the system and no door panels or CCTV cameras connected to this monitor;
Door 2 status − «On» or «Off», include or exclude second door panel from the monitoring list;
Record mode: «Snapshot» – take snapshot while incoming call or manually;
«Record» – record video while incoming call or manually;
6.5. Alarm settings
Press «Alarm» icon in the main menu to enter alarm settings.
Following parameters are available in the «Alarm» menu:
CAM1 sensor type:
«NO», motion sensor with normally disconnected contacts are used;
«NC», motion sensor with normally connected contacts are used;
«Off», motion sensor doesn’t used;
CAM2 sensor type:
«NO», motion sensor with normaly disconnected contacts are used;
«NC», motion sensor with normaly connected contacts are used;
«Off», motion sensor doesn’t used;
CAM1
– include or exclude first camera from the monitoring list;
CAM2
– include or exclude second camera from the monitoring list;
( )