Main menu
Motion detect
MD setting
MD source
CAM1
MD sensitivity
Middle
MD area
Store mode
Snapshot
MD notification
On
SM-07MHD
19
20
CAM1 alarm time
− alarm melody ringing time, activated by CAM1 motion sensor, from 00 to 10
seconds;
CAM2 alarm time
− alarm melody ringing time, activated by CAM2 motion sensor, from 00 to 10
seconds;
Alarm type:
«Snapshot» − save photo if motion detection has occurred;
«Record» − save video if motion detection has occurred.
6.6. Software motion detection settings
Software motion detector can observe and detect motion without any external sensors using any camera
image changes with the time. Camera power, that is used for motion detection must be constantly on to
let the monitor observe image changes and detect motion.
Motion detect
menu includes next sub menues:
MD source:
«Off» – software detector is off;
«Door1» – motion detection on Door1;
«Door2» – motion detection on Door2;
«CAM1» – motion detection on CAM1;
«CAM2» – motion detection on CAM2;
MD sensitivity:
«Lowest» – lowest software detector sensitivity;
«Low» – low software detector sensitivity;
«Middle» – middle software detector sensitivity;
«Hight» – high software detector sensitivity;
«Highest» – highest software detector sensitivity;
MD area
− motion detection area setting;
Store mode:
«Snapshot» – save photo if software motion detection has occurred;
«Record» – save video if software motion detection has occurred;
MD notification
− «On» or «Off». Enable or disable key backlight blinking if software motion
detection occurs.
MD area
Use up/down/right/left arrow keys to move motion detection area in corresponding direction of the
image while mode;
Use right/left arrow keys to move right motion detection area border or up/down arrow keys to move
bottom area border while mode;
Press or icon to change between moving and resizing motion detection area modes.
2019/05/07 9:23:42
Main menu
Motion detect
( )
