Slendertone System Arms, Инструкция по эксплуатации, Страница: 7 / 20

7
POSITIONING THE GARMENTS CORRECTLY
1
When you have completed your
session, remove the garments,
replace the covers on the gel pads
and store the product safely until
your next session.
Important:
Always ensure the controller is
switched off before removing the
garments.
Have any questions? Contact...:
UK 0800 169 3919
IRL 1800 719 833
International: +353 94 902 9936
Email - info@slendertone.com
2
3
1. Take the garment marked ‘R’ and place the larger section centrally over
the triceps muscle of your RIGHT arm. Ensure the wider part is towards
your elbow.
2. Then, bring the strap around the OUTSIDE of your arm and place the
small, oval section centrally over your biceps muscle. Then fasten the
strap securely, but comfortably, around your arm.
3. Repeat steps 1 and 2, placing the garment marked ‘L’ onto your
LEFT arm.
4. Switch on your control controller by pressing the On/ Off button for 2 seconds.
Select the program you wish to use and increase the intensity to a strong,
comfortable level.
Important:
- Before you increase the intensity, make sure that all of the silver studs
are completely covered by the gel pads. Press the edges of each gel pad
firmly onto the material before use.
- You may feel a tingling sensation in your lower arms during a session.
Simply changing the position of your arms can reduce this. If it persists,
pause the programme and adjust the position of the arm garments slightly.
English
4