Slendertone System Arms, Инструкция по эксплуатации, Страница: 4 / 20

1. On/Off Button ( )
Press and hold this button for 2 seconds to turn
your controller on or off. You may also pause
the exercise by briefly pressing this button.
2. Increase Toning Intensity ( )
Press and hold these buttons to increase
the intensity of the exercise. The right-hand
button controls the garment marked R. The
left-hand button controls the garment
marked L.
3. Decrease Toning Intensity ( )
Press and hold these buttons to decrease
the intensity of the signal to either arm.
4. Programme Button ( P )
Press this button to select the toning programme
you wish to use. There are 3 programmes, which
are explained later in this manual (page 8).
5. Information Button (
i
)
Press this button to see your training information, such as the maximum
intensity for your current or last session and the number of sessions you
have completed.
Toning intensity from the left arm garment.
Toning intensity from the right arm garment.
Counts down the time left in the current session.
Also displays error messages (see page 9).
Appears when the exercise has been paused.
Indicates that the sound is off.
Keylock is active - you cannot change the intensity levels or the
program accidentally.
This symbol indicates a poor contact between the controller and garments
or between the gel pads and the skin (see page 10 for more details).
Shows the battery power remaining.
Number of sessions completed.
Shows the programme currently running (1 - 3).
This symbol appears during each contraction phase.
Maximum intensity for the current/last session.
4
PRODUCT CONTROLS CONTROLLER DISPLAY
1.
2.
3.
5.
4.
DISPLAY