13
C A R I N G
C A R I N G
F O R
F O R
Y O U R
Y O U R
B E L T
B E L T
You should not let your unit get wet, but you may wipe it clean
with a lightly dampened cloth. The belt can be washed, but
you must first remove the unit and pads. Always follow the
instructions on the label when washing the belt.
Never machine wash your belt. Always hand wash it in
lukewarm water. This protects the internal wiring from
damage in the washing machine. You should take care
even when hand washing and never wring the belt to
remove water.
Do not use any bleach when washing your belt.
Do not dry clean your belt.
Do not tumble dry your belt. Dry the belt on a flat
surface, but not on anything hot (e.g. a radiator)
as the belt contains plastic parts. Ensure the belt
is completely dry before use.
The
SLENDERTONE
belt must not be ironed.
Material fabrics:
Outer material: 100% Polyester; Binding: 82% Nylon, 18% Elastane;
Hook & Loop: 100% Nylon; Foam: 100% Polyurethane.
The batch number of the belt is represented on the belt packaging, by
the number corresponding to the LOT symbol.
T R O U B L E
T R O U B L E
-
-
S H O O T I N G
S H O O T I N G
C H E C K L I S T
C H E C K L I S T
If you have problems getting your
SLENDERTONE FLEX GO
! to work, you should go
through the following checklist:
When did you last change your pads?
Pads need to be changed every 20-30 sessions. Call our support
line below to place an order.
Have you removed all the plastic covers from both the grid and
black sides of the pads?
Remember to keep one set of covers to protect the black side of
the pads during storage.
Are the pads covering the metal studs?
Double-check the pads on your belt to ensure the grid side of
each pad is fully covering the metal studs.
Are the batteries inserted correctly?
The batteries must be inserted in a specific way for the unit to
work (see page 7). If you find any corrosion within the battery
compartment call the support line below for assistance.
Is your unit connected properly?
Remove the unit and wipe the pin with a dry cloth. Then recon-
nect the unit, pushing it until it clicks into place.
Are the pads and belt positioned correctly?
Ensure the large, center pad is directly over your navel and that
the smaller pads are directly between your hip-bones and ribs.
Are the unit’s lights flashing?
Different lights display different information. Please read pages
9-11 for full details of what each sequence indicates.
Still having trouble? Call us toll free on
1-800-551-2443
See www.slendertoneusa.com for GelPads & Accessories
US Flex Go IM:Layout 1 11/08/2008 14:45 Page 15
