D e t a i l e d u n i t i n f o r m a t i o n
D e t a i l e d u n i t i n f o r m a t i o n
Your unit has 4 buttons and 5 light indicators (LEDs), which make it easy to operate. Familiarize yourself with these controls before you begin to set
up your
FLEX GO!
.
1. On/Off Button ( ) :
Press and hold this yellow button for 2 seconds to turn your
unit on or off. You may also pause the exercise by pressing
this button briefly.
2. Increase Toning Intensity :
Press this button (
) to increase the intensity of the exercise.
3. Decrease Toning Intensity :
Press this button (
) to decrease the intensity of the exercise.
4. Program Button ( P ) :
This yellow button is used to select the toning program you
wish to use. When you switch the unit on, it will be set at pro-
gram 1. To change to program 2, just press this button.
IMPORTANT
: When referring to the lights in this manual, you should be
viewing the unit from above with the belt around your waist. In this way,
the program light is on the left and the power light is on the right.
(i). Power Light:
The green power light is directly above the on/off button, which controls it.
This light glows to indicate that your unit is switched on and ready to use. It
will remain on for the duration of the program (unless the unit is paused,
when it will flash).
(ii). Intensity Lights:
There are three yellow intensity lights. They display information about
various aspects of your unit’s operation (see pages 9-10 for information).
(iii). Program Light:
The green program light is directly above the program button. It glows when
program 2 is selected and goes off again when you switch back to program 1.
The program light also indicates low battery power by flashing.
1. On/Off
Button
2. Increase
Toning
Intensity
3. Decrease
Toning
Intensity
4. Program
Button
Unit Controls - Buttons
Unit Controls - Lights
(i) Power Light
(ii) Intensity Lights
(iii) Program
Light
6
US Flex Go IM:Layout 1 11/08/2008 14:45 Page 8
