manualshive.com logo in svg

Sleipner STABILISER 66B, Руководство по установке, Страница: 23 / 68

Поделиться
Скачать
Sleipner STABILISER 66B Скачать руководство пользователя страница 23

 23

6461

2

2022

-

SPS-B

MG_0223

Hydraulic Installation

Actuator Valve Unit.

The valve has multiple functions:

1.      Combiner for the cylinder hoses

2.      Electric operated decouple valve

3.      Manual operated decouple valve

Manual operation:

• 

Push the red button for manual bypass/de-coupling.

Fins are now free and can be moved manually to the required position. 

Hose Connection

Some banjo fi tting brands used in combination with metric or BSP crimp fi ttings can cause interference between the swivel nut and the cylinder rod 

end. If required, the electrical operated decouple valve coil/solenoid can be removed during hose installation for better access to the hose fi ttings.

MC_0217

MG_0290

IMPORTANT

Electric operated decouple valve (coil nut) to be re-torqued to 6.8-9.5 Nm (5-7 

Ft-lbs) Over torque of the coil nut will damage the valve function.

Hoses move. Do NOT cable tie any 

other cables/objects to the hoses!

Electric operated 

decouple valve

Coil nut

WARNING

If the valve is unlocked and opened be aware of unexpected movement of fins and 

cylinders. Especially if the boat is afloat !

Содержание STABILISER 66B





































































Отзывы:

Нет отзывов