Sleipner SEP50, Руководство по установке, Страница: 6 / 28

6
4522 15 2021
-
SEP50
MC_0055
Proportional Technical Specifi cations
Safety features: - The PPC Speed Control unit will turn off motor power each time the main solenoids are activated. This removes any possibility for
solenoid lock-in. Any fault in the main solenoids will give feedback to the panel and turn off power to the electric motor.
MC_0136
Thruster Specifi cations
Description * 50
Available DC System (v) 12v & 24v
Thrust 12v or 24v (kg * lbs) 62 kg * 136 lbs
Thrust 10.5v or 21v (kg * lbs) 40 kg * 110 lbs
Typical Boat Size (m * ft) 8m - 11m * 27ft - 37ft
Propulsion System Single
Power (kw * Hp) 2.4kw * 3.2hp
Weight (kg * lbs) 15kg * 33lbs
*Valid for SE / SE IP & SEP / SEP IP
MC_0051
Technical Specifi cations
Motor: Custom made reversible DC-motor.
Gear house: Seawater resistant bronze. Ball-bearing at propeller shaft and a combination of ball bearing and slide bearing at drive shaft.
(Pre-fi lled and sealed for life)
Motor bracket: Glass fi bre reinforced composite material. Brass thread inserts.
Tunnel: Cross spun with rowing G.R.P tunnel
Steel & aluminium tunnels available at request.
Propeller: 5-blade skewback “Q-prop” propeller, fi breglass reinforced composite.
Batteries: Minimum recommended battery capacity (cold crank capacity by DIN/SAE standard)
Contact a battery supplier for more information.
Max. Use: 2 - 3 min. duty cycle at 20°C
Safety features: - Electronic time-lapse device protects against sudden change of drive direction.
- The electric thermal cut-off switch in electro motor protects against overheating (auto-reset when electro motor cools down).
- Flexible coupling between electro-motor and drive shaft protects electro motor and gear system if propeller jams.
- Original Sleipner panels shut off automatically 6 minutes after last use. This interval can be adjusted in 5 min steps up to 60
minutes or turned off completely.
- Original Sleipner panels use child-safe double ON buttons.
- An integrated microprocessor monitors solenoids, reduce wear and risk of solenoid lock-in.
- Auto-stop of the thruster occurs when an undesirable solenoid lock-in occurs or when continuous operation cut-off timer
exceeds 3 minutes.