Slee Off
-
Road –
[MaxTrax Mount for Slee Bumper]
(SOK0054) –
Installation instruction 3
Copyright © Slee Off Road and Slee & CO
The entire content of this document is property of Slee Off Road and may not be used or reproduced without permission.
Slee Off Road
(
Part Number)
Rev
1.01
–
01/22
Correct tab orentation with wings pointed towards bolt holes. (Step1)
Remove the Hi
-
Lift Bracket if installed. (Step 2)
Longer hardware used for both brackets. (Step 3)
1
Verify the contents and tools required.
Note the correct orientation of the re-
taining tabs for the MaxTrax mount as
shown, with the wings pointing outward.
Hardware:
(1)
Left MaxTrax Mount
(1) Right MaxTrax Mount
2
If you already have the Hi
-
Lift bracket
installed, remove it. If no Hi
-
Lift brack-
et is present, proceed to step 4.
3
Use one existing bolt from the Hi
-
Lift
bracket for the top fastener. Use two
provided longer bolts for the bottom
mounting holes.
Hardware:
(1)
3/8”
x
1”
Bolt (Existing)
(2)
3/8”
x
1
-
1/4”
Bolt
(3) 3/8”
Washer
