Slee Off
-
Road –
[MaxTrax Mount for Slee Bumper]
(SOK0054) –
Installation instruction 4
Copyright © Slee Off Road and Slee & CO
The entire content of this document is property of Slee Off Road and may not be used or reproduced without permission.
Slee Off Road
(
Part Number)
Rev
1.01
–
01/22
Install the brackets. (Step 4)
Arms out for MaxTrax install, down to close. (Step 5)
Add a lock to the bracket for extra security. (Step 5)
4
Install the MaxTrax brackets and Hi
-
Lift bracket as shown. Tighten all 5
bolts.
If no Hi
-
Lift bracket is used, install the
MaxTrax bracket in the same location us-
ing only 4 bolts.
Hardware:
(2)
3/8”
x
1”
Bolt
(4) 3/8”
Washer
(4) 3/8”
Lock Nut
5
Lift the locking swingarms out to at-
tach the MaxTrax. Secure the MaxTrax
in place with the included straps.
The MaxTrax may be locked in place using
the lower holes on the swingarms as
shown.
Hardware:
(2) straps
