16
Locate two frame pieces as shown and then fully
connect them together.
T-joint
Socket
Socket
Repeat above step 3 in the same way, you should
now have a free standing frame as shown.
Socket
T-joint
T-joint
T-joint
T-joint
T-joint
T-joint
Socket
Socket
Socket
Socket
Socket
3.
T-joint
3
2.
Insert the Leg Brace(4) into two Leg Extensions(3)
as shown, then tighten with M6x45mm Bolts(14),
M6 Washers(18) and M6 Nuts(17).
Press down on both Leg Extensions(3) at the same
time and fully insert them into the T-joint and Socket,
then tighten by M6x48mm Bolts(19) , M6 Washers(18)
and M6 Nuts(17).
Repeat above assembly steps until six frame pieces
are completed.
then flip the trampoline frame pieces over so that the
legs are now holding the trampoline frame pieces up.
19
14
14
17
17
18
18
19
17
18
17
18
4
1
3
3
2
Note: Do not tighten the Nuts yet.
Note: Tighten all the Nuts .