23
Your trampoline and enclosure are fully assembled now.
Make sure that all parts are securely attached.
Familiarize yourself and all users with the trampoline
and enclosure with the safety precautions, use and
instructional materials, and care and maintenance
instructions in this manual before using the trampoline
and enclosure.
Disassembly
To disassemble the enclosure and trampoline, follow assembly steps 1 through 11 in reverse order.
Replacing the Enclosure net
If your Enclosure net is damaged after using a period of time, you need to replace it by following assembly steps
4-7 and 10-15 in reserve order.
14
15
14. Using the included plastic tie, attach the Safety Placard
to the frame near the point where jumpers will climb
onto and off the trampoline.
15. Insert one Tie down kit(23) into ground as shown.
Then insert the other in the same way in the
opposite side.
Safety Placard
23
Frame