22
4. In this step you will secure the enclosure poles to the
frame of the trampoline.
Start from the enclosure door, lift one of the poles
assembled in step , see the inset drawing. Insert the Lower
Enclosure Tube(17) through the frame pad into the top hole
of the round socket on the trampoline frame as shown.
Make sure the bent side of the Upper Enclosure Tube
are facing toward the center of the trampoline.
Note: The end of the Lower Enclosure Tubes(17) are
sharp. Use caution when assembling.
Orient and insert the Inner Cap(viewed from under the
trampoline) into the indicated socket of the Frame.
Insert the Pole Retaining Pin. Slightly spread the spring clip
so the loop will rotate over the end of the Retaining Pin(20)
and then release. This locks the Pin in place and prevents
it from falling out.
Repeat this process to assemble the remaining five poles
to the trampoline frame.
5. Your trampoline enclosure is now fully assembled(put
together).
Make sure that all parts are securely attached. Familiar-
ize yourself and all users with the safety precautions,
use and instructional materials, and care and mainte-
nance instructions in this material before using the
trampoline and enclosure.
17
Enclosure Door
17
17
19
19
20
Socket
Frame
26
17
17
19
19
