17
5. Identify one Curved Leg with Male Ends(8) and
Curved Leg with Female & Male End(9). Connect two
Leg Extensions(7) to the Curved Leg with Male Ends
and Curved Leg with Female & Male End with three
M4.8x16mm Screws(15).
Connect the other Leg Extensions(7), Curved Leg
with Male Ends(8) and Curved Leg with Female &
Male End(9) in the same manner to form the other
legs.
Note: The two sides of this assembly should be
equal lengths.
7
Male End
Female End
8
3
3
3
4
4
4
11
11
11
Socket
9
15
15
15
Leg
Leg
7
6. Insert two Legs into the four indicated sockets of
the assebly you finished on step 4 on page 16 as
soon as deep.
Note: The assembly is tight. You may need to pull
apart the legs to match with the sockets. Push the
legs completely into the sockets. Overturn the
assemblies and legs as the insert drawing shown
to make the assembly easier.
7. Assemble the other part of the Trampoline top rail
in the same manner as steps above shown. Now you
will get the two assemblies as the right picture shown.
A
B
