9
16
STEP 5
Grab a friend
and flip the assembled corner leg sections over so they are
now standing on the legs.
(Do not skip this step! We’re not underestimating
your strength or anything, but if you connect before flipping, the entire frame
will be too heavy to flip.)
Now place a middle frame tube
(1)
(bend facing out)
in between two corner leg sections and slide them together.
Repeat on the
other side.
You will now have two square frame halves assembled.
Insert one U-shaped leg section into the leg posts of
a corner frame section. Make sure the holes of the
U-leg match the holes of the leg posts. Secure with two
M6x58mm bolts
(16)
, four M6 washers
(17)
, and two M6
nuts
(18)
.
Repeat this step until four corner leg sections are
assembled.
STEP 6
M6x58mm
Bolt
(x8)
17
18
M6 Washer
(x16)
M6 Nut
(x8)
1
Middle Frame Tube
(x2)
(16)
(16)
(17)
(17)
(17)
(17)
(18)
(18)
(1)
(1)
