17
STEP 21
Next insert a curved tube
(12)
into the pole cap
(14)
. Make sure
the bent side
of the enclosure poles are
facing towards the center
of the trampoline. Make
sure the holes on the curved tube, pole cap, and strap ring are all aligned.
Then insert a M5x50mm bolt
(20)
to secure in place.
Important: Make sure the
bolt goes into the round hole FIRST (not the hexagon hole) or you could break
the pole cap!
M5x50mm Bolt
(x8)
20
Starting from the enclosure door, lift one of the assembled poles and insert the straight tube
(11)
into the
socket. Repeat this process to assemble the seven remaining poles.
Helpful tip: When inserting the enclosure poles, pull back on the middle of the poles!
STEP 22
Socket
(14)
(20)
(12)
Strap
