11
STEP 9
Place the jump mat on the ground inside the frame with the enclosure net on top. Be sure to
center the
enclosure door
in the
middle
of one side of the frame. (Which technically shouldn’t be too difficult considering
it’s a square...)
You may want to use gloves for this step!
Using the spring tool
(21)
, hook
the
smaller end
of a spring
(9)
into the
V-Ring just left of the warning
label.
Stretch the free end of the spring until it reaches the nearest frame
hole on middle frame tube
(1)
.
Repeat this step to place a second spring
just right of the same warning label
. You should now have two springs
attached.
STEP 10
9
Spring
(x2)
21
Spring
Tool
(x1)
(21)
Enclosure door
Enclosure door
(1)
Warning label
(1)
