SkyVision Linx 300 Скачать руководство пользователя страница 13

Страница: 13 / 28

Page 11

SkyVision Linx 300 Pre-Install• REV2

b. Optional Remote Trigger Image/Video Capture

Capture devices specific to endoscopic cameras allow the surgeon to capture images or video using the

trigger on the camera. This method is limited to capturing only the camera source as the surgeon would

need to have the camera in hand when capturing. This is not a standard option to integrate with SkyVision

because of the many endoscopic vendors. Additionally, the SkyVision foot pedal option (SVIS-FTSW or

SVIS-WFTSW) can be used to capture any source that is set as the "Capture Source" at the touch panel.

The foot pedal is an available option in a wired or wireless model. If capturing endoscope images with

the endoscope trigger is required, this must be specified by the sales representative as a "special" on the

OPI documentation. The hospital must supply SKYTRON with the make and model number of the camera

and capture device so SKYTRON can verify compatibility, proper operation, and provide the required

items to quote.

c. Optional Keyboard/Mouse Switch

The KM Switch (SVIS-KM) allows a single keyboard and mouse to control up to four (4) PCs or one DCSS

and three (3) PCs.

When a DCSS is purchased in addition to the on-board PC, the KM Switch must be quoted. If the hospital

uses their PCs instead of purchasing the SkyVision PCs, they may use their keyboard and mouse instead

of the SkyVision keyboard and mouse. The hospital computer can be placed anywhere in the room with

their keyboard, mouse, and monitor. If they would like to use the SkyVision keyboard and mouse, a KM

Switch is required and the hospital PC must be located within 10 feet of the rack.

d. Additional Touch Panels

Optional second and/or third touch panels (SVIS-SECTP) may be selected with a SkyVision system

to enable the system to be operated from more than one nurse documentation station location. In this

configuration, the second and/or third touch panels are routed through the primary touch panel through

VNC connections.

2-7. Remote Rack Locations

The stock cable length for a SKYTRON SkyVision System installation is 100 feet. 200 and 300 feet cable

lenghs may be selected from the OPI document if longer cable lengths are required.

For installations requiring greater distances than 300 feet, consult with the SkyVision Product Manager

so the options can be specified and project details/requirements resolved.

Содержание Linx 300





























Результаты поиска

Содержание Linx 300

Отзывы:

Похожие инструкции для Linx 300

Бренды по названию

Популярные бренды

SkyVision Linx 300, Руководство по предварительной установке

Результаты поиска

Содержание Linx 300

Отзывы:

Похожие инструкции для Linx 300

Бренды по названию

Популярные бренды