REV. 11-16-18 Page 16
Round Flat Disc Fire Pits
SECTION B THERMOCOUPLE MANUAL
SAFETY
(TMSI) INST
ALLA
TION
INSTALLATION OF LAVA ROCK/MEDIA INTO BURNER PAN
Install lava rock into the burner pan. Ensure the lava rock is a
1-inch diameter for proper operation.
Note:
Do not pour Lava
Rock directly from bag. It should be placed naturally and NOT
packed in tight. Loose fitting is important to ensure robust flames.
Be sure rocks are free of any excessive dust. This prevents the
burner pan weep holes from being plugged and holding water.
IMPORTANT
:
Do not place rock over top or under the screen
cover.
The screen must be free of any debris to ensure proper
lighting of burner and good flame sense (See Fig. 17).
Cover the burner completely with media but do not make the depth
greater than 1-inch overtop of the burner portholes.
Do NOT cover the screen mesh with any rock or glass. It must be
free an any debris to operate properly.
IGNITOR ALIGNMENT
It is important check that the ignitor probes be properly aligned over-
top of the burner port holes and did not move during shipping. Use
the Fig.16 as a guide. Before lighting remove the screen cover of the
ignition hood to burner and ensure the thermocouple is directly over-
top of a burner port hole. The sparking probes and the thermocouple
must be in the path of a flame to ignite the gas for proper ignition of
the flame. Replace the screen cover and follow the operating
instructions.
Fig. 16
Proper alignment of thermocouple.
Fig. 17
Keep screen cover exposed
Lava Rock
Lava Rock
Lava Rock
Ignition Hood
Screen Cover
Thermocouple
1/8” Gap at Ignitor Probes
Igniton
Hood
⅛”
Fig. 15
TMSI typical installation.
Note: See optional mounting method of TMSI face plate on back of this manual.
Gas Outlet
to Fire Pit
Gas Inlet
Thermocouple
Lead
PIEZO48WH
PIEZO23WH
Ignitor Module
+
-
AAA
Plastic Nut
Red Button Cap
Mounting Plate
Illustration shows side view of valve and
Piezo ignitor.
Remove red button cap and install battery into Piezo
ignitor module.
Piezo Ground Tab
Ratin
g Pla
te
Bottom of Burner Pan
PIEZO48WH
Illustration above shows ground tab
connection underneath the burner pan.
f i r e - p a r t s . c o m
Содержание Firegear Outdoors FPB-20DBSMT-N
Страница 8: ...REV 11 16 18 Page 8 Round Flat Disc Fire Pits Section A Match Light MT Installation fire parts com...
Страница 30: ...REV 11 16 18 Page 30 Round Flat Disc Fire Pits Replacement Parts Accessories fire parts com...
Страница 37: ...REV 11 16 18 Page 37 Round Flat Disc Fire Pits NOTES fire parts com...
