GB
Congratulations on the purchase of this SkyTec mixer.
Please read this manual carefully prior to using the unit.
Warning
:
-
Read the manual prior to using the unit.
-
Keep the manual for future reference.
-
Keep the packaging for safer transport in its original packaging
-
For indoor use only.
-
Prior to the first use, have the unit checked by a qualified person.
-
The unit contains voltage carrying parts. DO NOT open the mixer.
-
When you unplug the unit from the mains always pull the plug, never the lead.
-
Never plug or unplug the unit with wet hands.
-
If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
-
If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
mains outlet.
-
Repairs and lamp replacement has to be carried out by a qualified technician.
-
Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
-
Do no place the unit near heat sources.
-
Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the
housing. Please let the unit reach room temperature prior to use.
-
Keep out of the reach of children.
-
All channel controls and the master volume control must be set to zero prior to switching the
unit on.
-
To prevent clipping of the amplifier do not set the volume level too high.
-
Switch the amplifier on at latest and switch it off at first.
- Do not use cleaning sprays for the slider controls. The residues of these spray cause dust
deposits in the controls. If a problem occurs, please consult a specialist
.
GENERAL DESCRIPTION
The TEC-450 Stereo Pro mixer features six input channels, fitted with a 3-band frequency control and
switchable between LINE, PHONO and MIC. The MASTER output features a slider control with a
signal strength meter via LEDs allowing an accurate setting of the signal level to the amplifier. The
built-in stereo headphones amplifier can be assigned to any input channel and features a separate
volume control. The TEC-450 mixer has a built-in 230V power supply. The unit can be used free
standing or rack mounted. Connect the mixer only to a 230Vac/50Hz mains outlet. For indoor use
only. Do not attempt to repair the unit yourself (except for the replacement of the crossfader). Repairs
should only be carried out by a qualified repair service.
CONNECTIONS AND SETTINGS
CHANNELS 1 TO 6
The channels 2 to 6 are totally identical. Channel 1 features in addition a TALKOVER function. The
inputs are suitable for a CD player, a turntable or a microphone. The RCA sockets (35) for CD player
(LINE) and turntable (PHONO) are located at the rear panel. The microphone input (1) is a combined
6.3mm/XLR jack and located on the top of the panel. Every channel is fitted with a selector switch for
PHONO, LINE or MIC (2), a GAIN control for the input sensitivity (3), a 3-band tone control (4/5/6), a
sound level slider control (8) and an EFFECT control (7).
SOUND LEVEL SETTING
Set the VU-meter (16) to PFL via the MASTER/PFL switch (17) and select the channel to be set via
the PFL switch (10). Set the GAIN in such a way that the level on the VU-meter displays about 0dB.
Set the tone control as required. If necessary re-adjust the GAIN again so that the VU-meter display
once again about 0dB.
