8
2.2 Pre Opera
ti
on
Before using the machine all parts that get in contact with food must be washed with
running water and neutral soap. To clean your Blender read item 3.3 Cleaning.
Make sure the blender is stable on its working place.
2.2.1 Placing the Cup
The Cup # 03 (Pic. 1) has a placing system allowing it to be easy and safely fitt
ed
To remove the Cup just li
ft
it using the handle .
Always remove or replace the Cup holding it firmly by its handle.
IMPORTANT
Never remove or place tha Cup with the Blender switched ON.
2.2.2 Placing the Lid
The Cup has a Lid (pic. 02) developed with non toxic material assuring an efficient seal
while processing. Make sure the lid is correctly placed on the cup as you may see picture
02 below.
IMPORTANT
Make sure that the network voltage is the same as the machine voltage.
Picture 02
17
5. Analysis and Problems Solving
5.1 Problem, causes and solu
ti
ons
The Blenders were designed to operate with the need of minimum maintenance but the
natural wearing caused by longer use of the equipment may occasionally cause some
malfunc
ti
ons.
If such problem occurs with your Blender refer to Table 02 in which the most common
situa
tions are listed with recommended soluti
ons.
