Skymsen TA-04MB-N Скачать руководство пользователя страница 4

4

loose switch  immediately OFF the blender.

1.1.14 When blending hot liquids, remove the Cap # 01 (Pic 01) and keep the hands off the 
Lid orifice avoiding occasional burnings.

1.1.15 Never touch the knife when the blender is operati

ng.

1.1.16 When  installing  the  blender  ground  it  properly  in  accordance  with  local 

recommenda

ti

ons.

1.1.17 Do not use the blender outside.

1.1.18 Do not let the blender operate without supervision.

1.1.19 Your blender does not replace any other kitchen appliance. It is not supposed to 

make mashed potatoes, it does not blend egg white or any other cream for covering, it 
does not grind raw meat, it does not blend hard pastas and does not extract kernels from 

fruit and vegetables.

1.1.20 Remember that this kind of blender works in seconds and not in minutes. Therefore, 
never let your blender working for more than one minute. It is better to switch it off and 

check the mixing consistency a

fter a few seconds to avoid over blending.

1.1.21 Overload the motor with big or heavy portions, since it will decrease the blender’s 
lifespan. If the motor stops, immediately switch it off, unplug and remove part of the load 

before restar

ti

ng the opera

ti

on.

1.1.22  For your safety, the temperature of the processed products shall not exceed 40 °C.

21

___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________

Содержание TA-04MB-N













Отзывы: