10
MPORTANT
Do not use the blender to process heavy dough .
IMPORTANT
The blending
time may be different for different products kinds.
When blending solid ingredients add some liquid, not following such precau
ti
on
may create an overhea
ti
ng that will damage the seal.
IMPORTANT
Never switch the machine on without load in it because it will cause irreparable
damages.
Place the Lid and the Cap following instructi
on given at item 2.2.2 and 2.2.3.
IMPORTANT
Cut the products in small size pieces of about 3,5 cm. This will help the blending
process
ti
me principally with frozen products.
When blending ice add some water.
Remove the Lid with its Cap from the Cup.
With the blender switched OFF put inside the Cup first the receipt liquid ingredients and
only a
ft
er the ingredients having more consistence.
15
4.3 Rou
ti
ne Inspec
ti
on
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT introduce your fingers between
the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precau
ti
ons
Check if motors and sliding or turning parts of the machine produce abnormal noises.
Check the tension of the belts and chains and replace the set when belt or chain show
signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your fingers between belts
and pulleys, nor between the chains and gears.
Check protec
tions and safety devices to make sure they are working properly.
4.4 Opera
ti
on
4.4.1 Advice
Be sure your hair is not loose in order to avoid ge
tting caught by turning parts which could
lead to a serious accident. Tie your hair well up and/or cover your head with a scarf.
The opera
ti
on performed by not trained or skilled personnel shall be forbidden.
- Never touch turning parts with your hands or in any other way.
- NEVER operate machine without all original safety devices under perfect conditi
ons.
4.5 A
ft
er Finishing The Work
4.5.1 Precau
ti
ons
Always TURN THE MACHINE OFF by removing the plug from the socket before cleaning the
machine.
Never clean the machine unless it has come to a COMPLETE STOP.
Put all components back to their func
ti
onal posi
ti
ons before turning it ON again.
DO NOT place your fingers in between belts and pulleys nor chains and gears.
