09
Table- 02
Problems
Causes
Solutions
* Lack of power.
* Problem in the electric circuit
of the machine.
* Check if machine is
plugged in and if there is
power in the power supply
source.
* The machine does not turn
ON.
* Cup is leaking.
* The machine turns on but
the motor turns slowly.
* Damaged seal.
* Defected motor capacitor.
* Call technical assistance.
5.2 Electrical Diagram Mod. LS-04/06/08/10
On/Off Switch
Voltage Selector Switch
5
Analysis and Problems Solving
5.1 Problem, causes and solutions
The High Performance Industrial Blenders were designed to operate with the
need of minimum maintenance but the natural wearing caused by longer use of the
equipment may occasionally cause some malfunctions.
If such problem occurs with your Blender refer to Table 02 in which the most
common situations are listed with recommended solutions.
* Call technical assistance.
* Call technical assistance.