Skymaster DCI 9410, Руководство по эксплуатации, Страница: 31 / 38

Reception of encrypted programmes (Pay-TV)
In order to be able to receive encrypted programmes, you will need a
special CAM decoding module for one of the numerous encryption systems
and a smart card for a particular programme or for a complete programme
package. You can obtain information on the encryption systems, enabling
and prices from the respective programme provider.
The receiver has 2 CAM module slots in PCMCIA standard and supports the
following encryption systems: Viaccess, AlphaCrypt, Conax, Crypto Works,
Irdeto and Aston/Seca. Switch the receiver off before inserting the CAM module. Insert the CAM module in
the appropriate slot in the receiver and then insert the smart card into the module.
After switching on the receiver, the module or modules will be initialised and the encrypted programmes
should now be decoded perfectly. If this is not the case, please contact the respective programme provider
to check whether the signal has been enabled for you.
You will find information on the module in the main menu.
Under INFORMATION in the main menu you will find the MODULE INTERFACE menu and a choice of all
known CAM modules. Note: The setting options, information and language are determined by the CAM
module. Be sure to pay attention to the application information provided by the manufacturer and by the
programme provider.
77
14. Information
The INFORMATION menu contains two submenus: Signal strength and
Information (device and software version).
Signal strength
The information window not only shows the signal strength of the
programme (and transponder) that is switched on, but also the frequency,
polarisation and the symbol rate.
This information could be helpful in the event of subsequent deletion or
searching for a defined transponder.
When aligning the antenna, the bar for the signal strength and signal quality
should indicate over 50%!