SKYLUX Climalux, Инструкция по монтажу

Страница: 43 / 56

01/05/2020
43/56
E_MH_Mounting_instructions_Skylux_Climalux
Finish
RAFTERS
Screwable clips
For plastic sheets (Pergotop/Pergotop-Soft sandwich panels are only adapted in combination with Skylux
screwable clips) or glass: the glazing thickness and options are provided in the table on page 55.
Drill holes with a Ø of 5.5 mm in the CLSB every 500 mm, starting and ending at 200 mm from the ends. Fasten
the CLSB to the rafter DX using ZSB screws. Fasten perpendicularly and use a slight torque to ensure the screw
head is pressed flat against the CLSB. The CLST clips must be fastened manually using a seal hammer and a plank.
Ensure the clips are not dented.
The screwable clip consists of 2 parts:
- the bottom clip CLSB
- the top clip CLST
Push seal C8 on both sides into the clip CLSB. Ensure that
seal C8 does not continue up to the end of the gutter side
but to the end profile on the glazing.
C3
ZSB
CLSB C8
C8
CLST
C3
DX
16 mm
ZSB
CLSB
C8
CLST
DX
CY10
CY10
C8
8-9 mm
500
200