SKYLUX Climalux, Инструкция по монтажу

Страница: 42 / 56

E_MH_Mounting_instructions_Skylux_Climalux 01/05/2020
42/56
Finish
RAFTERS
FINISH WITH CLIPS
For plastic sheets or glass: possibilities and glass thicknesses can be found in the table on p. 55.
Standard clips
There are 3 different positions for the clip CL16:
Position 1: for glass 44.2, 8 – 9 mm thick.
Position 2: for glass 55.2, 10-11 mm thick.
Position 3: for sheets of 16 mm.
The clip CL32 is used for 32 mm sheets.
Clipping is done by hand or with a rubber hammer and
a small plank. Make sure there are no dents in the clips.
Push the rubber C8 on both sides into the clips. Make
sure the rubber C8 does not reach the end of the
gutter side, but stops at the end profile on the glazing.
The CL16/CL32 is clipped or screwed on the rafter.
C8
C8
CL16
DX
C3 C3
C8
C8
CL16
DX
C3
C3
C8
C8
CL16
DX
C3
C3
8-9 mm
10-11 mm
16 mm
CL32
C8
C8
C3
C3
DX
32 mm