SKYLUX Climalux, Инструкция по монтажу

Страница: 36 / 56

E_MH_Mounting_instructions_Skylux_Climalux 01/05/2020
36/56
Rafters and side rafters
The rafters are pre-cut at the wall and gutter side. The slot at the wall side corresponds tot the rib of the wall
profile. Check the rafter lengths in function of the g snow and wind load (Use the load graphs on page 35
or calculate using the Climafast calculation application, at disposal for free for professionals).
Components
Rafter
DX + C3 (or CY10)
The rafters DX are cut to size in advance.
Preparation
Fix the support seals on both sides of the rafter DX:
C3 for glazing thicknesses 8-11 and 16 mm.
CY10 for glazing thicknesses 8 and 9 mm.
Fasten the stop profiles S16X or S32.3 on to the gutter side
of the rafters with the supplied ZSG screws.
60
94,5
118
α
DX
gutter wall
C3
(8-11 and 16 mm)
CY10
(8 - 9 mm)
S16X / S32.3
DX
ZSG