PN 38035_C
page 7 of 9
©2018 Skyline Exhibits TradeWinds® is a registered trademark of Skyline Exhibits
Tradewinds Immerse™ Display System Setup Instructions
Shoe Box Shelf
Monitor Mount (Continued)
8. Identify 2 black adaptor bars,
4 mounting screws, and 4
wingnuts
9. Screw adaptor bars to back side
of monitor. Be sure that the
threaded studs in the center of
the black bars are facing out
from the monitor.
10.
BEFORE starting this step: Accessory
feet MUST be added to the frame
prior to placing any monitor weight
on the frame. Do not exceed 30 lbs
of combined weight on this frame.
With fabric graphic already
installed, align threaded studs
of adaptor bars through holes in
graphic and mounting plate.
11. Secure monitor to mounting
plate by tightening wing nuts on
threaded studs. Steps 3 & 4 are
best done with 2 people.
1. Identify top, side and bottom
panels of shoebox shelf.
2. Attach side panels to bottom
panel by inserting hubs on
edge of bottom panel into
corresponding grooves on side
panel. Lock panels into position
by aligning panels flush.
