PN 38035_C
page 4 of 9
©2018 Skyline Exhibits TradeWinds® is a registered trademark of Skyline Exhibits
Tradewinds Immerse™ Display System Setup Instructions
1.
Start at the corners of the assembly. Work the FlexLock™ edge of the panel into the extrusion at each corner.
2.
Press the FlexLock™ edge of the panel into the extrusion near the middle of each extrusion.
3.
Work the panel into the extrusion from the corners inward and the middle outward.
4.
To Dismantle, lay frame assembly on floor covered with clean drop cloth provided. To help reduce wrinkling,
carefully fold fabric panel and pack into fabric panel storage bag.
Standard Foot Installation
Graphic Installation
1. Place leveling knob into
round opening on top of foot.
2. Index opening with second
leveling knob by sliding
captured foot into position. Insert
second knob into round opening.
3. Center foot on frame so
equal distances protude out
the front and back.
Front and Sides
Wrapped
Front
Graphic Installation Options
