PN 38035_C
page 5 of 9
©2018 Skyline Exhibits TradeWinds® is a registered trademark of Skyline Exhibits
Tradewinds Immerse™ Display System Setup Instructions
LED Arm Light and Clip
Accessory Foot
Channel Bar
Light Mount
Light Mount
Channel Bar
Important: Note that installation of these feet must happen prior to placing any type of monitor weight to your frame.
1. Disassemble your accessory foot by twisting off the wingnut, you should now have three separate pieces
2. Slide the long base of the foot under your frame.
3. Place the top part of the foot over the endcap on the frame.
4. Twist the wingnut over the screw to ensure a tight connection between the top and bottom of the foot
5. Repeat above steps with second foot on opposite side of frame.
