SJKB-40-D, SJKB-40-D/F
Page ii
JUN. 1999
WARNING
ANSI/SIA (United States)
You are required by ANSI/SIA A92.5
-1992 to read and understand YOUR RESPONSIBILITIES in the Manual Of
Responsibilities before you use or operate this work platform.
CSA (Canada) and CE (Europe)
You are required to conform to national health and safety regulations applicable to the operation of this work platform.
FAILURE TO COMPLY with your REQUIRED RESPONSIBILITIES in the use and operation of the work platform
could result in death or serious injury.
OPERATOR SAFETY REMINDERS
The National Safety Council reminds us that most accidents are caused by the failure of some individuals to follow
simple and fundamental safety rules and precautions. Common sense dictates the use of protective clothing when
working on or near machinery. Use appropriate safety devices to protect your eyes, ears, hands, feet and body.
You, as a careful operator, are the best insurance against an accident. Therefore, proper usage of this work platform
is mandatory. The following pages of this manual should be read and understood completely before operating the
work platform. Any modifications from the original design are strictly forbidden without written permission from
SKYJACK, Inc.
FAILURE TO AVOID THIS HAZARD WILL RESULT IN DEATH OR SERIOUS INJURY!
THIS MACHINE IS NOT INSULATED.
MAINTAIN SAFE CLEARANCES FROM
ELECTRICAL POWER LINES AND
APPARATUS. YOU MUST ALLOW FOR
PLATFORM SWAY, ROCK OR SAG. THIS
WORK PLATFORM DOES NOT PROVIDE
PROTECTION FROM CONTACT WITH OR
PROXIMITY TO AN ELECTRICALLY
CHARGED CON-DUCTOR.
ELECTROCUTION HAZARD
DANGER
VOLTAGE RANGE
MINIMUM SAFE APPROACH DISTANCE
(PHASE TO PHASE)
(FEET)
(METERS)
AVOID CONTACT
10
(0 TO 300V)
(Over 300V to 50KV)
(Over 50KV to 200KV)
(Over 200KV to 350KV)
(Over 350KV to 500KV)
(Over 500KV to 750KV)
(Over 750KV to 1000KV)
15
20
25
35
45
3.05
4.60
6.10
7.62
10.67
13.72
SECTION 2, Page 11
SJKB-40-D, SJKB-40-D/F
JUN. 1999
Table 2-2. Owners Annual Inspection Record
Table 2-3. Tire Specifications
Table 2-4. Maximum Platform Capacities
RECOMMENDED HYDRAULIC OILS
DO NOT use synthetic or fire resistant oil in this work platform. Use ATF Dexron III (ESSO) or equivalent hydraulic oil.
For conditions causing oil temperatures below -31°F (-35° C) and above 122°F (50° C) consult Skyjack, Inc.
Mt40c-201
Mt40c-202
Mt40c-203
RECOMMENDED AXLE LUBRICANT
TWO WHEEL DRIVE: SAE 80W90 GL-5 gear oil.
FOUR WHEEL DRIVE: Sunoco duragear (synthetic) SAE 75W90 gear oil or equivelant.
BRAKE OPERATION TEST PROCEDURE
Proper operation of the parking brakes should be checked daily or at the beginning of each shift. Locate the machine
in an appropriate area for testing the brakes. IMPORTANT NOTE: The area for testing the machine MUST be completely
level and free of obstructions. DO NOT drive on an incline unless the parking brakes are working properly. With the
machine fully stowed and the throttle switch in the high position (if engine powered). Drive the machine forward at full
speed and remove foot from foot switch. Repeat this step driving in reverse.
WARNING
Parking brakes will instantly engage causing the machine to stop immediately.
The machine should come to an instant and abrupt stop. If the machine does not stop instantly or if the machine pulls
to one side while stopping, the brake adjustment MUST be checked before putting the machine into service.
MODEL NUMBER___________________________ SERIAL NUMBER______________
RECORDING
DATE
RECORDING
YEAR #
1
2
3
4
5
6
7
8
OWNERS NAME
INSPECTED
BY
Model
Tire
Fill Specification
Size
Rating
Type
Pressure
STANDARD
30 x 10.00 x 16.5
10 Ply
Air
55 psi
FOAM FILLED
(Option)
30 x 10.00 x 16.5
10 Ply
Solid Urethane
*
* 28 Durometer Fill installed at 55 psi.
Model
Platform Capacity (unrestricted)
SJKB-40-D, SJKB-40-D/F
500# (227kg) 2 occupants
NOTE: Refer to capacity label on work platform for additional information.
