Skyjack SJKB-40-D, Руководство по эксплуатации

Страница: 5 / 12

SJKB-40-D, SJKB-40-D/F
Page iii
JUN. 1999
SERVICE POLICY AND WARRANTY
SKYJACK, Inc. warrants each new work platform to be free of defective parts and workmanship during the first 12
months. Refer to Warranty Statement on Page iv for details.
NOTE
SKYJACK, Inc. is continuously improving and expanding product features on its equipment; therefore,
specifications and dimensions are subject to change without notice.
This Safety Alert Symbol Means Attention!
Become Alert! Your Safety Is Involved.
The Safety Alert Symbol identifies important safety messages on machines, safety signs, in manuals, or elsewhere.
When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety
message.
SCOPE OF THIS MANUAL
This manual applies to the ANSI/SIA, CSA and CE versions of the SJKB-40- engine powered work platform. Equipment
identified with “ANSI/CSA” meets the ANSI/SIA-A92.5 -1992 standards. Equipment identified with “CSA” meets the
CAN3-B354. 4 M82 standards. Equipment identified with “CE” meets the requirements for the European countries, i.e.
Machinery Directive 89/392/EEC and EMC Directive 89/336/EEC and the corresponding EN standards.
DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER
AUTHORIZATION AND TRAINING. DEATH OR SERIOUS
INJURY COULD RESULT FROM IMPROPER USE OF THIS
EQUIPMENT!
SECTION 2, Page 10 SJKB-40-D, SJKB-40-D/F JUN. 1999
Table 2-1. Maintenance and Inspection Schedule
Mt40c-200
Daily Weekly Monthly 3 Months 6 Months * Yearly
Engine (11)
Fuel leaks (1)
á á
Engine oil (4)
á á
Engine RPM (8)
á á
Fuel filter (7)
á á
Muffler (2)(3)(11)
á á
Air cleaner (1)(7)
á á
Fuel tank cap (2)(3)
á á
Coolant level (1)(12)
á á
Mechanical
Struct. damage/welds (1)
á á
Parking brakes (2)
á á
Tires and wheels (1)(2)(3)
á á
Guides and wear pads (1)(2)(3)
á á
Railings and gate (2)(3)
á á
Bolts and fasteners (3)
á á
Rust (1)
á á
Whl brgs (2) King pins (1)(6)
á á á
Turret gear (1)(2)(3)(6)
á á
Turret gear box (1)(2)(3)(4)
á á
Pivot pins (1)
á á
Steer cylinders/tie rod ends(6)
á á
Axle gear oil (13)
á
Electrical
Battery fluid level (1)
á á
Joysticks and control switches (1)(2)(3)
á á
Cords and wiring (1)(3)
á á
Battery terminals (1)(3)
á á
Terminals and plugs (1)(3)
á á
Generator and receptacle (2)
á á
Limit switches (2)
á á
Tilt sensors (2)
á á
Directional sensing (2)
á á
Emergency pump (2)
á á
Hydraulic
Hydraulic oil level (1)(4)
á á
Hydraulic leaks/hoses (1)(3)
á á
Lift/lowering time (8)
á á
Hydraulic cylinders (1)(2)(3)
á á
Emergency lowering (2)
á á
Lift capacity (5)
á á
Hydraulic oil/filter (7)
á á
Miscellaneous
Labels (1)(9) Manuals (10)
á á
NOTES: (1) Visually inspect (2) Check operation (3) Check tightness (4) Check oil level (5) Check relief valve setting. Refer to
(6) Lubricate (7) Replace (8) See Table 5-7. General Specification Serial Number nameplate
(9) Replace if missing or illegible (10) Proper Operating Manual MUST be in the manual tube
(11) Refer to engine manual (12) Check only when cooled (13) Change oil. * Record
inspection