Skyjack SJ6826 RT, Руководство по эксплуатации

Страница: 14 / 92

Page 14 December 2007
Rough Terrain Scissors
TM
Control Functions Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZA
TION
FAMILIARIZA
TION
2.2-8 Base Control Console
The control console is located on the left side of the
engine compartment. It contains the following controls:`
5
1
2
3
4
8
9
7
6
Figure 2-5. Base Control Console - Dual Fuel
5
1
2
3
4
8
9
7
6
Figure 2-6. Base Control Console - Diesel
1. Hourmeter - This gauge records accumulated
operating time of engine.
2. Circuit Breakers - In the event of a power overload
or positive circuit grounding, the circuit breaker
pops out. Push breaker back in to reset.
3. Choke Pushbutton (Dual Fuel) - This pushbutton
switch aids in starting a cold dual-fuel engine.
Glow Plug Pushbutton (Diesel) - This pushbutton
switch energizes the glow plugs to aid in starting
a cold diesel engine.
4. Engine Start Pushbutton - This pushbutton “ ”
energizes the engine starter motor.
5. Platform Raise/Lower Switch - This switch
controls “ ” raising or “ ” lowering of
platform.
6. Emergency Stop Button - This button “ ”, when
depressed, disconnects power to control circuit
and shuts engine off.
7. Power Indicator Light - When the emergency
stop button on the base control console is pulled
out, this light glows.
Fuel Switch (Dual Fuel) - Used to switch between
“ ” liquid propane gas and “ ” gasoline.
8. Glow Plug Indicator Light (Diesel) - This red
lamp “ ” illuminates until the glow plugs
have completed their timed heating cycle. When
the lamp goes out, the engine is ready to be
started.
9. Platform/Engine/Base Key Switch - This three-
way selector switch allows the operator to turn the
“
” engine in an idling mode or to activate either
the “ ” base or “ ” platform controls.