59
SJ30 AJE SJ30 ARJE
213213AAA
Start Operation
Section 5 – Operation
5.1-7 Raising or lowering main boom
using base control console
1.
Activate and hold function enable switch by
pushing it to the right or left.
2.
Push boom raise/lower switch to either raise or
lower position. Release switch to stop.
5.1-8
Extending or retracting fly boom
using base control console
1.
Activate and hold function enable switch by
pushing it to the right or left.
2.
Push boom extend/retract switch to either
extend or retract position. Release switch to
stop.
5.1-9 Leveling platform manually using
base control console
1.
Activate and hold function enable switch by
pushing it to the right or left.
2.
Push platform leveling override switch to either
up or down position. Release switch to stop.
5.1-10 Operating using emergency power
switch at base control console
This is a momentary-type switch. This switch allows all
functions except the drive functions to operate in the
event of an emergency or an electrical system failure.
Refer to
Section 6.1
for the emergency lowering
procedure.
NOTE
The emergency power unit has two-minute duty
cycle.
CAUTION
Do not use emergency power unit continuously for
more than two minutes.
5.1-11 Activating platform control console
1.
On both the left and right sides of the MEWP,
plug in main power connectors.
2.
On base control console, turn base/off/platform
key switch to platform position.
3.
On base control console, pull out emergency
stop button.
WARNING
Ensure that you maintain three points of contact to
mount/dismount the platform.
WARNING
DO NOT operate any control on operator’s control
console without proper fall protection secured to
the designated location in the platform. Failure to
avoid this hazard could result in death or serious
injury.
4.
Enter platform.
5.
Attach body harness lanyards of each occupant
to fall protection anchorage points. Rated for
one (1) person per anchorage.
6.
On platform control console, pull out emergency
stop button.
WARNING
DO NOT drive or steer the MEWP when the
platform position does not allow you a clear view
of the base. Your area of operation should be
cordoned from other personnel or equipment.
To
order
go
to
Discount-Equipment.com
