Skyjack SJ 46AJ, Руководство по эксплуатации

Страница: 57 / 94

SJ 46AJ
December 2007 Page 57
Section 3 - Operation Loading/Unloading
3.10 Loading/Unloading
Know and heed all national, state/provincial and local
rules which apply to transporting of aerial platforms.
Only qualified/competent personnel shall operate the
aerial platform during loading/unloading.
Be sure vehicle capacity and loading equipment
hoists, chains, straps, etc., are sufficient to withstand
maximum aerial platform weight.
The transport vehicle must be parked on a level surface
and must be secured to prevent rolling while aerial
platform is being loaded or unloaded.
3.10-1 Loading and Tie-down
1. Lock turret using turret transportation lock
(refer to
Section 3.10-2 ).
2. Turn key switch to “ ” off position and remove
key before transporting.
3. Turn main power disconnect switch to “ ” off
position.
4. Chock aerial platform wheels (if necessary).
5. Remove all loose items.
6. Anchor down aerial platform to transport surface
using tie-down points (refer to
Figure 3-6 ).
7. Secure boom from side-to-side movement using
lower platform mount between boom end and
platform. Do not use excessive downward force
when securing boom section.
WARNING
Inspect aerial platform for loose or
unsecured items.
NOTE
For loading and unloading using a winch
line, refer to Section 2.5 .
Figure 3-6. Tie-down Points