Skyjack SJ 46AJ Скачать руководство пользователя страница 39

Страница: 39 / 94

SJ 46AJ

December 2007

Page 39

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

FAMILIARIZA

TION

FAMILIARIZA

TION

• Test Oscillating Axles

WARNING

DO NOT

operate any control on

platform control console without proper
fall protection secured to designated
location in platform. Failure to avoid this
hazard could result in death or serious

injury!

1. Extend fly boom 12 in. (30 cm) while on a

firm level ground.

Result: The steer axle should be locked.

2. Drive one of the steer tires up onto a

6 in. (15 cm) block or curb.

Result: An appropriate tilt of the aerial

platform chassis should occur.

3. Retract fly boom while in tilt position.
Result: The steer axle should unlock and

the aerial platform chassis should level
itself to ground.

Oscillating Axle - Unlocked

Oscillating Axle - Locked

Section 2 - Familiarization

Function Tests

Содержание SJ 46AJ































































































Результаты поиска

Содержание SJ 46AJ

Отзывы:

Бренды по названию

Популярные бренды

Skyjack SJ 46AJ, Руководство по эксплуатации

Результаты поиска

Содержание SJ 46AJ

Отзывы:

Бренды по названию

Популярные бренды