manualshive.com logo in svg

Skyjack SJ 46AJ, Руководство по эксплуатации

Поделиться
Скачать
Skyjack SJ 46AJ Скачать руководство пользователя страница 3

SJ 46AJ 

December 2007

Page 3

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, 

will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, 

could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury. It may also be used to alert against 

unsafe practices.

IMPORTANT

IMPORTANT indicates a procedure essential for safe operation and which, 

if not followed, may result in a malfunction or damage to the aerial platform.

The Safety Alert Symbol identifies important 
safety messages on aerial platform, safety signs 
in manuals or elsewhere. When you see this 
symbol, be alert to the possibility of personal 
injury or death. Follow the instructions in the 
safety message.

This Safety Alert Symbol means attention!

Become alert! Your safety is involved.

Содержание SJ 46AJ































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды