1. Introduc on
1.1 Safety
When using this equipment, keep in mind some basic safety precau ons:
1.1.1 Read all the instruc ons.
1.1.2 In order to avoid the risk of electric shocks and damage to the machine, never install
equipment on a wet or humid surface nor dip it in water or any other liquid.
1.1.3 The use of the equipment must be supervised when used next to children.
1.1.4 Before cleaning and when not in use or before inser ng or removing accessories,
disconnect machine from power source.
1.1.5 Never touch parts of the machine while on movement.
1.1.6 Do not use the equipment if cord or plug are damaged. Do not use the equipment if it
is not working correctly, nor if it has been damaged in any way. In case that happens, take
the equipment to the nearest Technical Assistance to check it up.
1.1.7 The use of accessories not recommended by the manufacturer may cause personal
hurt.
1.1.8 Keep your hands or any tool out of the machine while opera ng to avoid personal
hurt or any damage to the equipment. If it is needed to mix etc. switch OFF and unplug the
blender, use only a rubber spatula.
1.1.9 The knives are very sharp. Be careful while handling them.
1.1.10 In order to avoid the risk of personal hurt, never fix on the Cup Base only the Central
Bearing with the knife. Before to be sure the Cup is duly fi ed and strongly screwed .
1.1.11 Firmly screw the Cup on the Base. Not doing so and if by an accident the knife is
exposed when the blender is running, personal hurt might occur .
1.1.12 Always place Lid on top of the Cup before turning machine ON.
1.1.13 Always hold the cup while the blender is working. If the cup gets lose, switch the
machine OFF immediately. Remove the product from inside the cup and screw it strongly ,.
1.1.14 While mixing hot liquids, remove the transparent fill cap from the cup lid and keep
your hands away of the lid hole, avoiding possible burnings.
1.1.15 Do not use this machine on open air.
1.1.16 Do not leave the cord hanging out from the table or counter or lying on hot surfaces.