9.2.2
Product Labeling
The end product must be labeled to meet the FCC and IC product label requirements. It must have text containing
the following:
Contains FCC ID: WZ4-NOVA001 / IC: 5893A-NOVA001
The label must be permanently affixed to the product and readily visible to
the user. ‘‘Permanently affixed’’ means
that the label is etched, engraved, stamped, silkscreened, indelibly printed, or otherwise permanently marked on a
permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the
equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime
of the equipment in the environment in which the equipment may be operated and must not be readily
detachable.
9.2.3
RF Exposure Statement
To comply with FCC’s RF radiation
exposure requirements, this device and its antenna(s) must operate at a
distance of at least 20cm from all persons, and must not be co-located or operating in conjunction with any other
antenna or transmitter.
To comply with IC’s RF radiation exposure requirements, this device, when operated with the Linearly Polarized
Panel or Circularly Polarized Panel antenna listed below, or any similar high gain panel antenna, must maintain a
separation distance of at least 23cm from all persons, and must not be co-located or operating in conjunction with
any other antenna or transmitter.
To comply with IC’s RF radiation ex
posure requirements, this device, when
operated with all antennas, must maintain a separation distance of at least 20cm from all persons, and must not
be co-located or operating in conjunction with any other antenna or transmitter.
9.2.4
Antenna Selection
IC Statement:
This radio transmitter (5893A-NOVA001) has been approved by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
As part of the Modular Certification, the SkyeModule Nova was tested and approved for use with the following
antennas. All of these antennas incorporate connectors that are
“n
on-
standard” per FCC 15.203.
Antenna Type
Peak Gain
Manufacturer
P/N
Connector
Linearly Polarized Panel
9dBi
Laird
PAV90209-HFRTN
RP-TNC
Circularly Polarized Panel
9dBi
Laird
PAL90209H-HFRTN
RP-TNC
Dipole
5.4dBi
Linx Technologies
ANT-916-MHW-RPS-S
RP-SMA
Planar Inverted F (PIFA)
2dBi
Proprietary
Proprietary
U.FL
Under FCC and Industry Canada regulations, the SkyeModule Nova may only operate using an antenna type and
maximum (or lesser) gain than that approved for these antennas by the FCC and Industry Canada.
