background image

PARKING

1.After stopping the motorcycle,shift the
transmission into neutral and turn the fuel valve
OFF .Push the engine stop button in and hold it
in until the engine stops completely.
2 Use the side stand to support the motorcycle
while parked.
Park the motorcycle on firm, level ground to
prevent it from falling over.
If you must park on a slight incline ,aim the front
of the motorcycle uphill to reduce the possibility
of rolling off the side stand or over turning.
 3.Turn the ignition switch OFF and remove the
key.

ANTI-THEFT TIPS

1.Be sure the registration information for your
motorcycle is accurate and current .
2.Park your motorcycle in a locked garage
whenever possible.
3.Use an additional anti-theft device of good
quality.
4.Put your name,address and phone number  in
this Owner's Manual and keep it on your
motorcycle at all times.Many times stolen
motorcycle are identified by information in the
Owner's Manuals which are still with them.

NAME:

ADDRESS:

PHONE NO:

37

MAINTENANCE
THE IMPORTANCE OF MAINTENANCE

A well-maintained motorcycle is essential for
safe,economical,and trouble-free riding. It will
also help reduce air pollution. Careful pre ride
inspections and good maintenance are especially
important .
To   h e l p   y o u   p r o p e r l y   c a r e   f o r   y o u r
motorcycle,this section of the manual provides
a Maintenance Schedule.
The service intervals in this schedule are based
on average riding conditions.
More frequent service is needed if you subject
your motorcycle to severe use(such as
competition)or ride in unusually wet or dusty
areas.

Frequent servicing of the air cleaner is especially
important to help you avoid a possible costly
engine repair.
If your motorcycle overturns or becomes
involved in a crash, be sure your SKYTEAM
dealer inspects all major parts,even if you are
able to make some repairs.

WARINING

>

Improperly maintaining this motorcycle or
failing to correct a problem before you ride can
cause a crash in which you can be seriously
hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner's
manual.

38

Содержание ST125-11









































Отзывы: