SKY Engines SKY 100, Руководство пользователя

Страница: 6 / 26

A good breaking-in ensures a long life of the engine and enhances the performance
of its components.
Use the engine very carefully during the first 3 hours of flight.
Do not use the engine at maximum power for extended intervals of time.
Do not keep the accelerator in the same position for several seconds; in this case it is
preferable to open and close the accelerator without increasing the elevation in order
not to force the engine
Use the engine for 10 minutes at a time, then allow it to cool.
Repeat the same operations every time you check the engine.
THE BREAK-IN PERIOD CAN BE CONSIDERED COMPLETED AFTER 3 HOURS
OF FLIGHT OR THE USE OF 10 LITERS OF FUEL!
2.3 STARTING THE ENGINE
SKY100 engine is started by a manual starter. It must strongly pull the rope and
avoid to flooding the engine.
2.2 RUNNING - IN
WARNINGS!
• The exhaust gases of the engine
contain carbon monoxide, which can cause
death. DO NOT START THE ENGINE
INDOORS. ALWAYS VERIFY THAT THIS
OPERATION IS PERFORMED OUTDOORS IN
ADEQUATELY VENTILATED AREAS.
• Always start the engine after it has
been completely assembled as the lack of
some components could cause severe
damage.
• Always handle the propeller with
utmost care at it may reach very high
speeds to the point of becoming hardly
visible. Always maintain a safety
distance.
If the engine is cold, always wait
a few minutes after start-up to
heat the engine and accelerate
at regular intervals to avoid
damaging it.