SKY Engines SKY 100, Руководство пользователя

Страница: 21 / 26

Some components of SKY100 are subject to wear. Therefore, to avoid damaging the
engine or affecting its operation, we recommend you perform the operations
described below at the specified intervals:
Before flying, always check the safety devices of the muffler, silencer and filter box
(verify that the steel cables are in place and correctly connected).
Replace the sparking plug after approximately 80 hours of flight.
Inspect the silent blocks that support the radiator every 50 hours and replace them
after approximately 100 hours of flight.
The same applies to the silent blocks of the crosspiece and muffler, which have to be
replaced after 100 hours of flight.
Inspect the blocks of the clutch after approximately 50 hours of EFFECTIVE flight. For
information on how to disassemble them, see the section on the disassembly of
secondary components in Chapter 3.0.
• the depurtures increase the wearing out of the blocks of the clutch:an exagerated number of
departures decrease the effective hours of flight.in this case we recommend (especially to the
beginner, who are making exercises of departures) to check constantly the wear of the
different component of the clutch.
Replace the membranes of the carburetor after approximately 100 hours of flight.
Inspect the laminar bundle under the radiator every 50 hours of flight. Carefully
inspect the conditions of the blades because they could damage or break the engine
if damaged. Inspect the bank bearings approximately every 150 hours.
Regularly inspect the teeth of the flywheel.
CHECK THE LEVEL OF COOLANT INSIDE THE RADIATOR EVERY 10 HOURS OF
FLIGHT USING THE CAP SITUATED ON THE TOP OF THE RADIATOR, NOT THE
ONE IN THE DISCHARGE CONTAINER.
✓
Our technicians recommend the use of Arexons Glitech 4100 Coolant