SKY Engines SKY 100, Руководство пользователя

Страница: 14 / 26

3.3.5 STARTER
Remove the cover from the manual
starter loosening the screws in a
crossed
pattern.
Loosen the wire reel and remove it
from the cover. Then, loosen the handle
and remove the wire reel from the spring.
Remove the worn wire from the side
hole of the wire reel and replace it with a
new one. Knot the end of the wire and
firmly insert the knot into the hole.
To replace the spring, insert the end
side into the cover duct, as shown in the
photo.
Attention! When inserting the spring,
always make sure that the tip of the
spring is facing the channel from which
the wire projects.
Delicately tighten the spring on the
cover, holding it with one hand.
Thoroughly lubricate the area in contact
with the spring.
Insert the wire reel and turn the spring
by one revolution.
Loosen the worn
teeth of the
flywheel.
Install the new teeth following
the procedure described in
points 1, 2 and 3.