Sky Drone
c/o Skylab Mobilesystems Ltd.
1104 Crawford House, 70 Queen’s Road Central, Central
Hong Kong
EN English
7. Optional: Configure your telemetry / command & control link
The system assumes a default baudrate for the telemetry / command & control link of
115200 baud. You can configure a different baudrate up to 2097152 baud. It will become
active after the next device restart. Make sure to press the “update” button and then restart
the device.
The physical link to your flight controller assumes a pinout according to the Dron ecode
standard. See “Telemetry Port” on
https://wiki.dronecode.org/workgroup/connectors/start
While MAVLink connections work out-of-the-box, the bi-directional data channel is protocol
agnostic. This means that any data protocol can be transferred through this data channel.
It is a low latency, high speed, direct TCP connection from Sky Drone client software to the
Sky Drone FPV 3 device. This data connection is separate / independent from the real-
time UDP channel used for transmitting video.
© Sky Drone
Sky Drone FPV 3 – Manual
Page 9/42
