DA 3800 Flange Inlet
8
Mounting Guide
433364 DA 3800 screen
It is used for protection against direct light incidence, wind, and driving rain.
The 10 screws for mounting must be ordered separately. When mounting in
a sandwich wall, 351585 can be used.
One per inlet.
433358 DA 3800 outside flange
It is used where a closed wall transition is required on the outside.
The 14 screws and 14 washers for mounting must be ordered separately.
When mounting in a sandwich wall, 433375 can be used.
One per inlet.
433375 DA 3800 screw kit f/outside flange
Used when mounting the DA 3800 outside flange in sandwich walls.
433359 DA 3800 extension rod 40 cm
The extension rod is used if you want to run the pull rod round heavy con-
crete pillars or the like, where it is not possible to run the pull rod directly
through the pillar by making a through-going hole.
It is supplied with an 1850 mm nylon cord.
The 4 screws for mounting must be ordered separately. When mounting in
a sandwich wall, 351585 can be used.
One per inlet.
433371 DA 3800 extension piece 14 cm
Used for wall dimensions from 14-24 cm.
433369 DA 3800 extension piece 17.5 cm
Used for wall dimensions from 24-27.5 cm.
433370 DA 3800 extension 25.5 cm
Used for wall dimensions from 27.5 to 35 cm.
The extension must be used together with the inlet funnel and the inlet
when the wall thickness exceeds 13 cm.
If an extension piece is to be used on a flange inlet without inlet funnel
(433354 and 433373), 433352 inlet funnel must always be ordered, as it
contains an insulation piece.
It comes with mounting screws.
One per inlet.