40
Replacement Procedures
Service Manual
SKOPE TME650/1000
Compressor
The compressor is located at the front of the refrigeration unit, beside the
condenser coil.
Before replacing the compressor, ensure the compressor electrics are
operating correctly and that the compressor is being supplied with
consistent voltage over 220 volts. Ensure the voltage does not drop at start-
up. If the voltage does drop, ensure the unit has a direct power supply (not
from a multi-box or extension cord).
Compressor
Electrics
The compressor electrics box is located on the right side of the compressor.
The cover on the electrics box can be eased off using a screwdriver to
expose the compressor relay and wiring.
Capacitor
Compressor
relay
Figure 6: Compressor
electrics